General Purpose Plastisol Ink, Phthalate Free & Ready To Use / 100% Cotton White And Light-Colored Garments

$11.11$364.20

GENERAL PURPOSE PLASTISOL INK

  • Phthalate Free, Ready to use
  • Suitable for heat sensitive fabrics
  • Superior adhesion to nylon fabrics
  • Ideal for printing on bleed prone textile substrates
  • Low bleed property resists dye migration
  • Superb opacity for dark colored backgrounds

In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) as Section 108 Phthalates (<.1% DBP DEHP,DINP,DIDP)

Description

Looking for colors?  Check out our Bleed Resistant Plastisol Ink.

GENERAL PURPOSE PLASTISOL INK

  • Phthalate Free, Ready to use
  • Suitable for heat sensitive fabrics
  • Superior adhesion to nylon fabrics
  • Ideal for printing on bleed prone textile substrates
  • Low bleed property resists dye migration
  • Superb opacity for dark colored backgrounds

In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) as Section 108 Phthalates (<.1% DBP DEHP,DINP,DIDP)

STOCK, END-USE:

Cotton, 50/50 cotton/polyester blends, and some synthetics.

DESCRIPTION:

PF-GP Series is formulated with a unique low viscosity and perfect consistency for printing straight from container.

PF-GP Series may eliminate The need for modifiers and save production time in the process. It provides super soft-hand finish on most textile substrates, especially White and light-colored garments.

Note: Pre-test on actual substrate before any full production run, for adhesion, wash fastness and other desired effects.

FINISH:

Durable, soft-hand finish.

COLORS:

Available low-bleed opaque colors; formulated using non-leaded pigments.

SCREEN FABRIC:

Mesh counts up to 355 mono-filament polyester (142T European Mesh).

STENCIL:

Dual-sensitized direct method photo emulsion or SBQ pre-sensitized photo emulsion or equivalent

CURE/DRYING:

Heat-cure at approximately 320°F (160°C) for 1 to 3 minutes. Will not air-dry.

MODIFICATIONS:

To reduce ink viscosity with RE703 or RE704, add 5% or less (by weight of ink). Reducer is to be used very sparingly and only when necessary. RE705 can be added up 10 to 20% (by weight of ink) if color shade is not crucial.

SQUEEGEE:

When printing textiles, use a medium/ hard (65-85 durometer) squeegee.

STORAGE:

Plastisols respond to heat. Always store at cool room temperatures below 90°F (32°C). Avoid exposing inks to elevated temperatures before printings.

PACKAGING:

1- quart (0.945 Liter), 1-gallon (3.78 Liters), 5-gallon (18.9 Liters) containers. *Drums available in 30-gallon (113.4 Liters) and 55-gallon (207.9 Liters).

SAFETY & HANDLING:

Refer to Material Safety Date Sheet (MSDS) for complete information.

WASH UP SOLVENT:

T-125 Wash up or equivalent / SC-510 Biodegradable wash up. (Non-Petrochemical)

MODIFIERS:

PFGP-081 – Clear Extender Base / PFGP-084 – Soft Base / RE-703 – Quick Flash Reducer / RE-704 – Clear Reducer / RE-705 – Curable Reducer

Additional information

Weight N/A
Dimensions N/A
Colors:

White, Primrose Yellow, Lemon Yellow, Chrome Yellow, Golden Yellow, Burnt Orange, Orange, Holiday Green, Light Green, Bright Green, Kelly Green, Dallas Green, Columbia Blue, Turquoise, Ultra-Marine Blue, Light Royal Blue, Royal Blue, Sky Blue, Bright Blue, Light Blue, Navy Blue, Light Navy Blue, Bear Navy Blue, Mono Blue, Purple, Light Purple, Cardinal Red, Warm Red, Scarlet, Flag Red, Maroon, Light Maroon, Tan, Light Brown, Dark Brown, Black, Dove Grey, Heather Grey, Russell Grey, Base, Extender, Soft Base, Overprint Gel

Sizes:

Quart, 1 Gallon, 5 Gallon

Welcome to RockStar Screen Printing Supply. If you do not see what you are looking for or are having a problem placing an order, feel free to order by phone at 303-375-7777! Dismiss