NYLON PLASTISOL INK
- Phthalate Free, Bleed Resistant
- Curable at Low Temperature (275-285º F)
- Ideal for printing on bleed-prone textiles such as Nylon, Canvas and Polyester
- One Pot Plastisol Ink for hard to adhere textiles such as Polyester (Pongee), Nylon and Acrylic
- Superb opacity for dark-colored backgrounds
In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) & Section 108 Phthalates (<.1% DBP DEHP,DINP,DIDP, DOP)
Acrylic, Cotton, 50/50 cotton/polyester blends, Denim, Nylon Jacket, Tote Bags and other synthetics.
PF-NP-BRN Series is popularized for its Bleed Resistant characteristics on dark-colored or bleed-prone textiles. It assures non-migration of fabric dye into the print and leaves a very high opaque, soft-hand finish.
PF-NP-BRN Series is plastisol with exceptionally the highest level of adhesion to Hard-to-print fabrics such as nylon and other synthetic fabrics.
PF-NP-BRN Series is a One Pot System, ready to print from straight Container.
Note: Pre-test on actual substrate before any full production run, for dye bleeding, adhesion, wash fastness and other desired effects.
Durable, soft-hand finish.
Available low-bleed opaque colors; formulated using non leaded pigments.
Mesh counts up to 160 mono-filament polyester (64T European Mesh).
Dual-sensitized direct method photo emulsion or SBQ pre-sensitized photo emulsion or equivalent
Heat-cure at approximately 275-285°F (140°C) for 1 to 3 minutes. Will not air-dry.
In situations where bleed resistance and opacity is not crucial, extend with PF-NP-081 Clear Extender Base for longer ink mileage.
To reduce ink viscosity with RE-703 or RE-704, add 1- 5% or less (by weight of ink). Reducer is to be used very sparingly and only when necessary. RE-705 can be added up to 10-20% (by weight of ink) if color shade is not crucial.
Use a medium/ hard (65-85 durometer) squeegee.
Plastisol ink is very sensitive to to heat. Always store at cool room temperatures below 90°F (32°C). Avoid exposing inks to elevated temperatures.
1- quart (0.945 Liter), 1-gallon (3.78 Liters), 5-gallon (18.9 Liters) containers. *30-gallon (113.4 Liters) and 55-gallon (207.9 Liters).
SAFETY & HANDLING:
Refer to Material Safety Date Sheet (MSDS) for complete information.
WASH UP SOLVENT:
T-125 Wash up or equivalent. / SC-500 Bio.Wash-up / SC-510 Instant Bio.Wash-up (Non-Petrochemical)
PF-NP-081 – Clear Extender Base / RE-703 – Quick Flash Reducer / RE-704 – Clear Reducer / RE-705 – Curable Reducer