Trans.Lumi Plastisol PF-OL Series Day-Glow Florescent – For light color fabric outstanding and intense color brilliance.

$34.33$587.50

TRANS.LUMI BROL Series (Day-Glow Florescent)

  • Phthalate Free, Transparent Fluorescent Ink
  • For light color fabric outstanding and intense color brilliance
  • Inter-mixable with other transparent application

In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) and Section 108 Phthalates (<.1% DBP DEHP,DINP,DIDP)

Description

Trans.Lumi Plastisol PF-OL Series Day-Glow Florescent

Trans.Lumi Plastisol PF-OL Series Day-Glow Florescent< Features:

  • Phthalate Free, Transparent Fluorescent Ink
  • For light color fabric outstanding and intense color brilliance
  • Inter-mixable with other transparent application

In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) and Section 108 Phthalates (<.1% DBP DEHP,DINP,DIDP)

STOCK, END-USE

Cotton, 50/50 cotton/polyester blends, and some synthetics.

DESCRIPTION

Trans.Lumi Plastisol PF-OL Series Day-Glow Florescent is popularized with the attractiveness of fluorescent brilliant colors.

Trans.Lumi Plastisol PF-OL Series Day-Glow Florescent are mostly printed on light color or white or white underlay.

Note: Pre-test on actual substrate before any full production run for adhesion, wash fastness and other desired effect.

FINISH:

Stain, Dye Effect.

COLORS:

Available High Opaque and Fluorescent colors.

SCREEN FABRIC:

Mesh counts up to 350 (140T European Mesh)

STENCIL:

Dual sensitized direct method photo emulsion or SBQ pre-sensitized photo polymer or Equivalent or Indirect films.

CURE/DRYING:

Heat-cure at approximately 320°F (160°C) for 2 to 3 minutes. Will not air-dry. (infrared heat recommended for use)

MODIFICATIONS:

To extend colors, add PFGP-081 Clear Base To print fine details, add PFPC-850 Halftone base. To reduce ink viscosity with RE-703 or RE-704, add 5-7% or less(by weight of ink.

SQUEEGEE:

When printing textiles, use a medium/ hard (75-85 durometer) squeegee.

STORAGE:

Trans.Lumi Plastisol PF-OL Series Day-Glow Florescent inks respond to heat. Always store at cool room temperatures below 90°F (32°C). Avoid exposing inks to elevated temperatures before printings.

PACKAGING:

1- quart (0.945 Liter), 1-gallon (3.78 Liters), 5-gallon (18.9 Liters) containers. *Drums available in 30-gallon (113.4 Liters) and 55-gallon (207.9 Liters).

SAFETY & HANDLING:

Refer to Material Safety Date Sheet (MSDS) for complete information.

COLOR RANGE:

All colors are formulated with non-leaded pigments.

MODIFIERS:

PF-GP-081 – Extender Base / RE-703 – Quick Flash Reducer / RE-704 – Clear Reducer / RE-705 – Curable Reducer

WASHUP SOLVENT:

T-125 Wash up or equivalent. / SC-510 Instant Bio.Wash-up (Non-Petrochemical)

Additional information

Weight N/A
Dimensions N/A
Colors:

Invisible Blue, Chartreuse, Golden Yellow, Orange, Tangerine, Mint Green, Brilliant Blue, Flame Red, Shocking Pink, Cerise, Magenta, Purple

Sizes:

Quart, 1 Gallon, 5 Gallon

Welcome to RockStar Screen Printing Supply. If you do not see what you are looking for or are having a problem placing an order, feel free to order by phone at 303-375-7777! Dismiss