Transfer Plastisol Ink
- Phthalate Free, Hot and Cold Peel
- Highly pigmented for heat transfer ink
- Superior adhesion to most fabrics
- Excellent Opacity on dark color backgrounds
In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) and Section 108, Phthalates (<.1% DBP DEHP,DINP,DIDP)
Cotton, 50/50 cotton/polyester blends, and some synthetics.
PF-TR Series is popularized with its consistent high-opaque print result on dark and light colored textiles. It is formulated for heat transfer s applicable to knit or woven fabrics .
PF-TR Series produces a highly embossed effect, which is both flexible and elastic.
PF-TR Series is ready to use straight from the container or can be extended for light color applications.
Important Note: PF-TR Series colors do not contain bleed inhibitors.
Note: Pre-test on actual substrate before any full production run, for dye bleeding, adhesion, wash fastness and other desired effects.
Durable, soft-hand finish.
Available low-bleed opaque colors; formulated using non-leaded pigments.
Mesh counts up to 355 mono-filament polyester.
To reduce ink viscosity with RE703 or RE704, add 1- 5% or less (by weight of ink). Reducer is to be used very sparingly and only when necessary. RE705 can be added up 10 to 20% (by weight of ink) color shade or opacity is not crucial.
When printing textiles, use a medium./ hard (65-85 durometer) squeegee.
Plastisols respond to heat. Always store at cool room temperatures below 90°F (32°C). Avoid exposing inks to elevated temperatures before printings.
1- quart (0.945 Liter), 1-gallon (3.78 Liters), 5-gallon (18.9 Liters) containers. *30-gallon (113.4 Liters) and 55-gallon (207.9 Liters).
SAFETY & HANDLING:
Refer to Material Safety Date Sheet (MSDS) for complete information.
WASH UP SOLVENT:
T-125 Wash up or equivalent / SC-500 Bio. Wash-up / SC-510 Instant Bio.Wash- up.